Frequently asked questions - uCube

Table of contents

1. What is inertia separation?

Separation by inertia is the working principle of the uCube. See in details our technology.(https://www.ucube.swiss/technology/)

2. What is the advantage of your Ucube compared to others ?

The main advantage is the 3 different filtration steps which dramatically increases the holding capacity and efficiency.

3. Dry spray booth/water spray booth : what is the difference?

Take a look to our article available on the Aerem blog.

4. How to convert my paint booth? Do we need to transform the entire paint booth? Do we need to change the extractor?

Converting a water wash booth or a dry booth to our uCubes will, in both situations, require a new frame to adapt in front of the existing one to hold the higher paint load.

5.Does uCube only work with paint?

uCube are made to capture any wet solids or liquid particles contained in an air stream:  high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.

6. Where uCube are manufactured?

Our products are produced in our 3 manufacturing sites:

  • Montreal, Canada
  • Szczecin, Poland
  • Ho Chi Minh City, Vietnam

7. Where do you deliver to?

All over the world.

8. What happens if my package is delivered damaged?

If your package is delivered damaged, please contact your sales representative to find the best possible solution (credit note or replacement)

9. Can I become a distributor of uCube?

Of course. We invite new companies to join our growing international distributor network. We wish to promote our solutions in the existing and new markets. You can fill out the form below : Become a distributor https://www.aerem.com/become-a-distributor/

10. How to assemble the uCube?

See in 40 seconds how it is easy to install our uCube filtration solution https://www.ucube.swiss/our-cubes/

11. How often should uCube filters be changed??

As soon as airflow slows down under 80 ft/min (24,3m/min) in a robot operation or 100 ft/min (30,5m/min) in a manual operation.

12. In what sizes are the uCube available?

UCube 300: 20’’ x 20’’ x 8’’ – 50cm x 50cm x 20cm

UCube 500: 20’’ x 20’’ x 20’’ – 50cm x 50cm x 50cm

13. Is there any patent on Ucube ?

It is patent pending.

1. What is inertia separation?

Separation by inertia is the working principle of the uCube. See in details our technology.(https://www.ucube.swiss/technology/)

2. What is the advantage of your Ucube compared to others ?

The main advantage is the 3 different filtration steps which dramatically increases the holding capacity and efficiency.

3. Dry spray booth/water spray booth : what is the difference?

Take a look to our article available on the Aerem blog.

4. How to convert my paint booth? Do we need to transform the entire paint booth? Do we need to change the extractor?

Converting a water wash booth or a dry booth to our uCubes will, in both situations, require a new frame to adapt in front of the existing one to hold the higher paint load.

5.Does uCube only work with paint?

uCube are made to capture any wet solids or liquid particles contained in an air stream:  high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.

6. Where uCube are manufactured?

Our products are produced in our 3 manufacturing sites:

  • Montreal, Canada
  • Szczecin, Poland
  • Ho Chi Minh City, Vietnam

7. Where do you deliver to?

All over the world.

8. What happens if my package is delivered damaged?

If your package is delivered damaged, please contact your sales representative to find the best possible solution (credit note or replacement)

9. Can I become a distributor of uCube?

Of course. We invite new companies to join our growing international distributor network. We wish to promote our solutions in the existing and new markets. You can fill out the form below : Become a distributor https://www.aerem.com/become-a-distributor/

10. How to assemble the uCube?

See in 40 seconds how it is easy to install our uCube filtration solution https://www.ucube.swiss/our-cubes/

11. How often should uCube filters be changed??

As soon as airflow slows down under 80 ft/min (24,3m/min) in a robot operation or 100 ft/min (30,5m/min) in a manual operation.

12. In what sizes are the uCube available?

UCube 300: 20’’ x 20’’ x 8’’ – 50cm x 50cm x 20cm

UCube 500: 20’’ x 20’’ x 20’’ – 50cm x 50cm x 50cm

13. Is there any patent on Ucube ?

It is patent pending.

Indiana Jones

Archeologist

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Đặt lịch hẹn